top of page
< MicroELISA Analysers
Personal LAB
NEXgen

Personal LAB

Fully Automated 2-Microplate ELISA Analyser


State-of-the-art specifications

Reliable performance

A compact benchtop analyser that processes two microplates side by side.
Each plate has its own pipetting, temperature, incubation, washing and reading programme, so two different assay profiles can share one session.

Product Code

PL 01

Independent Microplates

5+2 (7)

How a run works

From sample tube to result, with no operator steps in between.

Sample station

Up to 96 barcoded tubes load on 16-position strips. The built-in reader identifies every sample before pipetting.

Pipetting

Two independent arms: 1000 µL tips multi-dispense reagents, 200 µL tips handle samples, standards and controls.

Incubation

Two thermally isolated chambers, 30–45 °C, with programmable linear shaking for each plate.

Washing

A 16-channel head (8 dispense, 8 aspirate) with 3 buffers on board, 1–9 cycles and soak up to 3 minutes.

Reading

Single, dual or triple-beam 

vertical reading 

through 8 interference filters, 

0–3.0 OD.

Benefits

  • 96 sample tubes on board

  •  192 predilutions per run


  • No reagents or control consumables needed any more

  • Program almost all the microELISA assay protocols currently available on the market

  • Reliable sample identification and matching of test results

  • A genuine open system, for maximum flexibility with varying testing needs

  • Maximised precision and efficient pipetting

  • Zero carry-over

  • Fast pipetting that maintains accuracy and efficiency

  • Different assay profiles on each plate in the same session

  • Reduced maintenance, increased precision and reliability

  • Remote support and diagnostics


Main Features

  • Direct ‘kit-to-instrument’ loading from the assay kit reagent bottles and control vials onto the working platform

  • New, easy-to-use programming interface

  • PSID: true Positive Sample Identification

  • Fully barcoded reagent inventory

  • Flexible loading dock, with:

    • different slides for vials and bottles of controls, standards and reagents

    • different slides for different formats of sample tubes

  • 200 µL and 1000 µL tips

  • Disposable tips for sample pipetting

  • Detection of clots, bubbles and insufficient volume during pipetting

  • Level sensing on all liquids and buffers loaded on the instrument

  • 2 independent pipetting systems

  • Two microplates, each fully and independently programmable for pipetting, temperature, incubation, washing and reading

  • Latest hardware technology

  • Modern software applications


A trusted choice for over 20 years

Two independent plates, loaded straight from the kit, with no extra consumables.

For fully automated microELISA testing in small to mid-sized laboratories. Personal LAB is an open-system, 2-microplate ELISA analyser that pipettes, incubates, washes and reads each plate independently. It runs EIAgen kits for HIV, hepatitis and syphilis, as well as other validated microplate immunoassays.

Station by Station

An integrated barcode reader gives true positive sample identification (PSID). Together with sample strip loading, it gives the most reliable sampling, sample identification and matching of test results.

  • Compatible tubes: 55 to 75 mm high, 12 to 13.5 mm in diameter

  • Up to 96 tubes on 16-position sample strips

One robotic arm, driven by step motors and controlled by optical and mechanical sensors, carries 2 dispensing systems that work independently for maximum pipetting efficiency.

  • 1000 µL tips dispense reagents in multi-dispensing mode

  • 200 µL tips dispense samples, standards and controls

  • Patented PLS pneumatic level sensor on the tip, with clot detection

  • Acoustic and visual alarms if there is not enough liquid

  • Automatic predilution of samples, standards and controls: up to 192 predilutions per run

The plate housing processes two microplates at the same time, each programmed completely on its own. A single microplate can also be run.

During incubation, the plates sit in two independent, thermally isolated chambers at the temperature the operator sets.

  • Linear shaking with programmable intensity and period

A 16-channel wash head: 8 channels dispense wash solution and 8 aspirate. Cycles, volume and number of washes are easy to program, and three wash buffers can be loaded at the same time.

  • Washing volume: 100 to 2000 µL

  • Cycles: 1 to 9

  • Soak time: 1 second to 3 minutes

  • Pressure: programmable

  • Each protocol can include several washes with different cycles, volumes, soak times and pressures

The photometer reads vertically with a single, double or triple beam, as the operator programs it. With triple-beam (over-range) reading, the instrument converts the absorbance values detected at the different wavelengths automatically.

  • Standard filters: 405, 450, 492, 550 and 620 nm

  • Optional filters: others in the 400 to 700 nm range, up to 8 filters in total

Personal LAB keeps downtime to a minimum to maximise laboratory efficiency.

  • About 5 minutes a day for preparation and shutdown

  • Self-diagnosis and alarm procedures built in

  • Fully automated end-of-run cleaning


bottom of page